Industrial Vinyl Side Cleaner

Industrial Vinyl Side Cleaner

While vinyl siding is very resilient it’s not immune to the wear and tear of life. Snow, rain, dirt, dust, wind, smudges, scrapes, and sun can all make the once-pristine siding look worn or grimy. That’s why cleaning vinyl siding is so important. Using an approved industrial vinyl side cleaner can restore tired vinyl siding and beautify the building like new.

How to Use Industrial Vinyl Siding Cleaner

When using an industrial vinyl siding cleaner make sure you carefully read the directions on the product. This will ensure you know the proper dilution and application process. Apply as directed, either manually, with a hose, or with a pressure washer. Rinse off your cleaner thoroughly and enjoy your freshly cleaned siding!

Tips to Avoid Ruining Vinyl Siding

  • Under Pressure
    If you’re using a power washer be mindful of the amount of water pressure you use. If the pressure is too high you run the risk of damaging your siding! It’s recommended that when pressure washing vinyl siding people start at the lowest pressure setting and work up from there if more force is needed. Make sure you’re also maintaining a good stream angle when power washing.
  • Check the Ingredients
    When selecting a cleaner make sure you’re looking up the ingredients. Some cleaners work better than others for certain stains, like mold or mildew, while others tackle soot and algae. Certain ingredients may also harm the vinyl siding causing it to crack, warp, or streak. If you’re ecologically conscious you may also want to avoid certain chemicals like benzene. When benzene gets into the waterways through storm drains it can cause problems for aquatic life.
  • Maybe Don’t Mix It Yourself
    It can be risky to mix a vinyl siding cleaner up from scratch if you’re going beyond the basic dish soap and water. Benzene and acetone are two chemicals you certainly want to avoid. Bleach, though readily available, should also be avoided. Bleach is corrosive and if rinsed off imperfectly or incorrectly, it can damage the vinyl siding.

Cleaning Tips For Vinyl Siding

  • Use a Pressure Washer
    Using a pressure washer is the fastest and simplest way to clean vinyl siding. The cleaner or detergent alongside the water pressure ensures an easy no-mess quick clean that will leave you satisfied.
  • Avoid Abrasives
    Steel wool, scouring powder, and wire brushes all run the risk of scratching your vinyl siding. Though it may be tempting to go after a tough stain with abrasive tools it’s better to use a power washer. If you want to put in some elbow grease consider using a brush with nylon bristles to get the job done.
  • Clean Your Gutters
    Before you start cleaning your vinyl siding cleaning out your gutters is a good idea. If there are branches, leaves, acorns, or other debris clogging your gutters, overflow can cause freshly cleaned siding to look dirty all over again
  • Window Warning
    If your power washing your siding be extra careful of any Avoid spraying into the seams in the siding around windows as this can cause water to get underneath the siding, which can lead to future problems.
  • Rinsing All-Around
    After you’ve finished cleaning your siding consider giving your plants a little rinse. This helps ensure that if there was any residue splashed on them that they won’t be harmed. You can use a water can for this or a garden hose

Want to Find a Good Industrial Vinyl Side Cleaner?

If you’re looking for a good industrial vinyl siding cleaner Tidal Washers.com  is happy to help! We have a wide variety of power washers, detergents, cleaners, and more. If you’d like to learn more about the available options or have power washing questions click here.

Leave a Reply

Your email address will not be published.